Realización de tesis doctoral en Mecanizado de Alto Rendimiento
Escuela Politécnica Superior
Mondragón, España
hace 3 días
source : MONDRAGON Corporation

Descripción de la oferta

Realización de tesis doctoral en el Grupo de Mecanizado de Alto Rendimiento de Mondragón Unibertsitatea, en el marco de un proyecto europeo

Summary :

The improvement of vehicles safety is a EU priority. The enhancement of the components performance reduces the likelihood of accidents caused by failures of these components.

The roject aims the fatigue and tribological performance improvement of automotive transmission parts by means of an optimized surface integrity reached through innovative finishing techniques.

Additionally, some of these techniques will allow the lubricant removal, leading to a 100% ecofriendly process. Complementary, an automatic learning approach, capable of predicting the surface integrity and the fatigue and tribological behavior, depending on input variables (material properties, process parameters ), will be developed.

The EU is committed to reducing the number of traffic accident victims, as shows the adoption of the proposal in May of 2018.

To attain this goal, the first step is to reduce the probability of accidents and, given that component failures is one of the main causes for vehicle accidents, the likelihood of piece failures must be minimised.

Considering that more than 25% of the component failures in vehicles are related to transmission parts, the study to be developed in the project will be focused on two of the main transmission pieces : shafts and gears of the gearboxes.

The main way to reduce the risk of failure is improving the component properties, mainly the fatigue and tribological performance.

While shafts are subjected to torsional, bending and biaxial loads, gears support tooth bending loads and pitting. As the maximum stress level caused by these loads is reached at the component surface, the surface properties have a great influence on the component in-service performance.

Good tribological performances in terms of wear and friction are expected for both shafts and gears, as they work in sliding contact with counterpart transmission components and SI it's one of the main contributors to fullfill the tribological commitment.

Although during the last years, different finishing operations, alternative to the conventional grinding, have been developed, their industrial implementation has not been faced yet.

These promising finishing operations are expected to improve the component surface integrity (SI), leading to a better fatigue and tribological performance.

Moreover, most of them can be conducted without lubricant or with a minimum quantity (MQL) resulting in a manufacturing process more ecofriendly than the actual one, in which high amounts of lubricant are used.

The PhD student will carry out the integral study (SI characterization, fatigue and tribological evaluation ) performed in shafts manufactured by novel finishing operations (mainly grinding).

Complementary, a machine learning approach will be developed to predict the SI and the fatigue and tribological behavior of the components, avoiding very expensive and time consuming tests.

Gross Salary : 18246 euro / year

Requisitos

Master de Ingeniería industrial

Inglés : nivel C1

Reportar esta oferta
checkmark

Thank you for reporting this job!

Your feedback will help us improve the quality of our services.

Inscribirse
Mi Correo Electrónico
Al hacer clic en la opción "Continuar", doy mi consentimiento para que neuvoo procese mis datos de conformidad con lo establecido en su Política de privacidad . Puedo darme de baja o retirar mi autorización en cualquier momento.
Continuar
Formulario de postulación